All Inventory

Item Number Manufacturer Quantity Size Style Category Details
5183 NRM 30 NRM 88, 13 - 16.5" bead First Stage Tire Building Machines Thirty (30) units available NRM 88/99 first/second stage combinations, 13" to 16.5" bead range, tool...
5184 NRM 30 NRM 99R3, 13 - 16.5" bead Second Stage Tire Building Machines Thirty (30) units available - NRM 88/99 first/second stage combinations, 13" to 16.5" bead range, to...
5148 McNeil 1 55" 650-55 M14 BOM Bagomatic Tire Press Mechanical One (1) Used McNeil BOM Tire Tyre Press, Model 650-55-M14, 55" Dome OD, 51.5" Dome ID, Mold Thicknes...
5142 NRM 12 40.5" 300-40.5 Autoform Bagwell Tire Press Mechanical Twelve (12) NRM 300-40.5 Autoform_Mechanical_Tire_Tyre_Presses, 27 SMO, 15 NON-SMO, 300,000lbs closi...
5030 McNeil 2 900-36x30 Passenger / LT Tire Bladder Press One (1) Used McNeil Tire Tyre Bladder Press, Model 900 - 36 x 30, closing force 900,000 lbs (450 ton...
5180 NRM 1 RF-1216 12-16” Bead First Stage Tire Building Machines One (1) used NRM Model RF-1216 TBM tire building, 12-16” bead range, tooling_not_available, removed ...
5159 ASM Akron Standard Machine 1 D70 11" Road Wheel TUO Tire Inspection Testing One (1) Used ASM_Akron_Standard_TUO tire tyre uniformity optimizer, D70_11” road wheel, 13-16” bead ...
5122 NRM 1 6 x 6 150x150 Duplex Tread Extruder Tire Tread Department One (1) Used NRM 6 x 6 Duplex HEAD ONLY, extruders can be offered separately, for small passenger ca...
5149 McNeil 7 55" 500-55 BOM Bagomatic Tire Press Mechanical Fourteen (14) used McNeil Mechanical Tire Tyre Press, Model 500-55 BOM Bag-o-matic, standing post in...
5102 Spadone 1 PCR Buffer Tire Inspection Testing One (1) New Unused Spadone Model 90720, tire_buffer_sidewall_grinder, passenger light truck tire tyr...
5156 ASM Akron Standard 1 20" road wheels Final Finishing Tire Inspection Testing One (1) used Akron Standard Machine (ASM) Endurance Tire Tyre Test Machine, 200 km/hr, Model 20M LBS...
5041 WYKO 1 13 to 15 Bead Range Passenger Light Truck Tire Building Drums (60) WYKO tire_building_drums, 13-15" tire tyre bead range, suitable for passenger and light truck
5170 BFS Bridgestone 30 13 - 16.5 Single Stage Tire Building Machines Thirty (30) Used Tire Building Machines, NRM Model 85B/D, single stage, all steel 13" to 16.5" bead
7340 General Electric 1 500 HP DC Motor One (1) Used GE General Electric Motor, 500 HP DC, 850 / 1400 RPM, 500 Volts, Enclosure DPFG-8V
7302 MagneTek 1 250 HP AC Motor One (1) Used MagneTek 250 HP, 735 RPM, 380 volt, 50 cycle
4282 Michelin 1 60 material width Surface Wind Up Innerliner Calender Parts One (1) Used Surface wind up for innerliner calender
6032 NRM 1 3 1/2" 90mm 3.5" Cold Feed 12:1 Extruder Cold Feed One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 75 HP 1750 RPM 500 VDC mot...
6075 NRM 1 4 1/2" 120mm 4.5" Cold Feed 12:1 Extruder Cold Feed One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 24.68:1 G/B ratio, 100 HP DC...
6120 KOBE 1 8" 200mm 8.0" Cold Feed 18:1 Extruder Cold Feed One (1) Used Kobe 8” 200mm Cold Feed Extruder, 18:1 L/D ratio, 29:1 gearbox reduction ratio, motor G...
1060 Farrel 1 #9 160 Liter_Litre Tangential 2-Wing Mixer One (1) Used Farrel #9 Banbury Rubber Mixer, 2-wing tangential rotors, bull gear drive, 160 litre ch...
1073 Farrel 1 #11D 236 Liter Litre Tangential 2-Wing Mixer One (1) Used Farrel #11D 11D Banbury Rubber Mixer, 2-wing tangential rotors, drop_discharge_drilled_...
6254 NRM 1 3 1/2" 90mm 3.5" Pin Barrel 14:1 Extruder Pin Barrel One (1) Used NRM 3.5” 90mm 3 1/2" pin barrel rubber extruder TMIII, QSM extruder, 14:1 L/D ratio 75...
2060 Bolling 1 20 x 48 500x1200 2-Roll Mill Two (2) Used Bolling 20" x 48" 500mm x 1200mm Rubber Mill, rubber mixing mill, motor 125 HP DC, 230v...
8090 Scott Testers 1 TBM A14 Viscometer Lab Equipment One (1) Used Viscometer, Scott Testers Inc, Rubber Lab Equipment, model TBM A14, Parker cylinder 6” ...
6170 NRM 1 3 1/4" 80mm 3.25" Hot Feed Extruder Hot Feed One (1) Used NRM 3.25” 80mm 3 1/4" Hot_Feed_Rubber_Extruder, 4:1 L/D, no motor
1880 American Hydrotherm 1 F620 27D TCU Temperature Control Unit Mixer Parts One (1) Used TCU temperature control unit for a 620 Litre / #27 mixer, (4) four zones, 7.5 HP per zo...
2555 Bolling 4 26" Dia Rolls Stock Guides Mill Parts One (1) Used Complete set of stock guides for an Adamson 26” x 26” x 84", 650mm x 2100mm, roller mil...
6711 Werner & Pfleiderer 1 2 1/3” 58mm 2.3" Twin Screw 16:1 Extruder Twin Screw One (1) Used Werner & Pfleiderer 2.3” 58mm 2 1/3" Twin Screw Extruder, twin screw compounder, contin...
6199 KSBI 1 12" 300mm Hot Feed Extruder Hot Feed One (1) Used KSBI 12” (300mm) Hot Feed Rubber Extruder, Lufkin 38.9:1 gearbox ratio, GE motor
6200 Farrel 1 12" 300mm Hot Feed Extruder Hot Feed One (1) Used Farrel 12" hot feed extruder, right hand feed, breach lock head, Order No. 75A0-1181
6194 Farrel 1 10" 250mm Hot Feed Extruder Hot Feed One (1) Used 10" Farrel Hot Feed Rubber Extruder, roller feed, Motor 200 HP, 500 volt, 1750 rpm.
8257 Morgan 1 200 HP 29.92:1 Parallel Shaft Gearbox Reducer One (1) Used Morgan gearbox 29.92:1 model D456HI-Q , 600 RPM input, 20 RPM output, peak torque ratin...
2559 Farrel 1 23T, 1DP Connecting Gear Mill Parts One (1) Used Farrel_Connecting_Gear_23T, 1DP, 15” face, 13” bore, 15.5” OD, 1.5”x.5” KW, very good c...
4011 Farrel 1 10 x 20 254x508 Vertical Calender 3-Roll One (1) 10x20 3-Roll Calender, 20 HP, 440v motor_adjustable_speed, Cabinet style, under-slung drive
9010 Midlands 1 18" 450mm Two Heads Inner Tube One (1) Used 18" SPLICER MIDLANDS # 900-OH-2675 TWO HEADS
6404 Berstorff 1 8" 200mm Barrel Extruder Parts One (1) New Berstorff 8.0" (200mm) 2-piece barrel and roller feed section.
9059 Custom 1 2" - 3.5" strips from 30" sheets Slitter Miscellaneous One (1) Used Custom Sheet slitter with rotary blades, 30” max feed sheet, nine (9) knives capable of...
6190 NRM 1 10" 250mm Hot Feed Extruder Hot Feed One (1) Used 10" NRM Hot Feed Rubber Extruder, 21.4 GB Ratio, Motor 200 HP, 250 volt, 1750 rpm. Ser...
6420 Farrel 1 6" 150mm Head Strainer Straining Extruder Parts One (1) Used Farrel 6" 150mm strainer head (head only, extruder can be quoted seperately)
2127 Bolling 1 26 x 84 660x2130 2-Roll Mill One (1) Used Bolling 26 x 84, 660mm x 2130mm Rubber Mill, rubber mixing mill, direct drive Alten gea...
1034 TMP 1 75 Liter Litre Tilt Kneader Mixer One (1) Used TMP Techni-Mix 75 Liter Litre Rubber Tilt Mixer, 200 HP DC 575v 3ph AC Reliance motor, ...
4130 Bolling 1 8 x 16 200x400 Inverted "L" Calender 4-Roll One (1) Used Bolling 8 x 16, 200mm x 400mm, Inverted "L" Rubber Calender, individual 10 HP 550v - 17...
4260 Farrel 2 24 x 68 600x1700 Stock guides Calender Parts Two (2) Used Farrel_bronze_stock_guides_for 24" x 66" or 24" x 68", 600mm x 1700mm, calender
6428 Farrel 1 12" x 34" 300x700mm Head Sheet Sheeting Extruder Parts One (1) Used Farrel 12" Extruder head_for_making_up_to 34" wide head, 2-1/4" center, 1-1/2" side th...
6430 Farrel 1 12" x 32" 450x800 Head Sheet Sheeting Extruder Parts One (1) Used Farrel 12" Extruder head for making up to 32" wide sheets
6072 NRM 1 4 1/2" 120mm 4.5" Cold Feed 12:1 Extruder Cold Feed One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 30.30:1 G/B ratio, 125 HP DC...
6062 Royle 1 4 1/2" 120mm 4.5" Cold Feed 10:1 Extruder Cold Feed One (1) Used Royle 4.5” 120mm 4 1/2" Cold_Feed_Rubber_Extruder, 10:1 L/D, power roll feed, screw in ...
4265 Mount Hope 1 6" x 76" 150x1700mm Banana Roll Assembly Calender Parts One (1) Mount Hope Banana Roll Assembly 6" x 76" 150x1700mm, material speader with curved rolls for ...
4267 Litzler 1 66 Material Width Fabric Steering Rolls Calender Parts One (1) Used Litzler Fabric edge guides for a 66" material width fabric calender line
4277 Boschert Bosch 1 2” 50mm Chuck Calender Parts One (1) Used Boschert Bosch 2” Chuck for wind-up let-off
4275 Litzler 1 66" Material Width Pull Roll Stand Calender Parts One (1) Used Litzler Pull Roll Stand, low tension, 10 HP, FALK reducer, three (3) driven rolls, new ...
1860 Farrel 1 F270 Connecting Gears Unidrive Mixer Parts One (1) Used set output shafts from Farrel F270 or #11D gearbox, includes 46/41 tooth connecting gea...
1875 Farrel 1 F270 11D Coupling Unidrive Mixer Parts One (1) Used Farrel set of F270 unidrive couplings, 53 Tooth.
6311 Farrel 1 13 x 8.5 330x215 Drop Extruder Extruder Dump One (1) Used Farrel_13x8.5_Dump_Extruder, Drop Extruder, 30:1 G/B ratio, GE 200 HP, 1150/1700 RPM, 5...
4273 Spadone 1 72 wide 1830 Prick Roll Calender Parts One (1) Used Prick Roll Assembly for rubber calendar, 72” wide, 48” accumulator, removable pins, air...
2560 Adamson 1 19/23T 1DP Connecting Gears Mill Parts One (1) NEW Set of connecting gears with 21" centers, 19/23 tooth, 1 DP, 12/10" bore, 12" face, suit...
7320 Seimens 1 450 HP DC Motor One (1) Used Seimens 450HP (335KW) 1460/1680RPM, 520V DC Motor, Frame TGH5312-ONG10-7MU5-Z
6419 RMS 1 8" x 24" 200x600 Head Roller Die Extruder Parts One (1) Used RMS_Rollerdie_head_for_8” x 24" extruder.
1730 Skinner 2 3D Rotors Unidrive Mixer Parts Two (2) New Skinner FYH unidrive rotors for 3D mixer. Complete for FYH dust seals with shroud insert...
5111 RMS 1 23" Width Roller Die Head Tire Tread Department One (1) used RMS roller die head, 6” ID inlet mating with extruder, 23” roll face, approximately 20”...
2142 Farrel 1 26 x 84 660x2130 2-Roll Twin Mill One (1) Used Farrel 26x84 twin mill, Lufkin T720 Gearbox, 37.5 reduction ratio, direct drive, no mot...
4012 Bolling 1 10 x 28 250x700 Vertical Calender 2-Roll One (1) Used 10 x 28” Bolling 2-Roll Inclined Cushion Gum Calender, 30HP motor, bronze bushings, cas...
6031 NRM 1 3 1/2" 90mm 3.5" Cold Feed 17:1 Extruder Cold Feed One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Cold Feed Rubber Extruder, 17:1 L/D, 75 HP 1750 RPM 500 VDC mot...
6424 Farrel 1 8" x 38" 200x965 Head Sheet Sheeting Extruder Parts One (1) Used 8" extruder head for making up to 38" wide sheets.
2575 Farrel 2 9" Bore Coupling Mill Parts Two (2) Used 9" Bore couplings, 28 teeth.
2576 Farrel 1 15" Bore Coupling Mill Parts One (1) Used 15" bore 28 teeth coupling.
1930 Farrel 1 11A End Frames Mixer Parts One (1) Used Farrel_11A_Slide_door end frames.
2574 Farrel 1 6" Bore Coupling Low Speed Mill Parts One (1) Used 6" Bore 30 teeth coupling.
6432 RMS 1 23" Width Head Roller Die Extruder Parts One (1) Used RMS Roller die head, single roll roller die, 6” ID inlet mating with extruder, 23” roll...
8180 Farrel 1 150 HP 38.7:1 Parallel Shaft Gearbox Reducer One (1) Used Farrel Gearbox Reducer, 150HP, 38.7:1 reduction ratio
7520 Siemens 1 75 HP Drive Panel Motor Drive Panel One (1) Used Siemens 75 HP Microprocessor DC drive, S/N 16-96-D3607501-01.
2577 Farrel 1 16" Bore Coupling Mill Parts One (1) Used Low Speed Coupling 16" 40 teeth coupling.
6193 NRM 1 10" 250mm Hot Feed Extruder Hot Feed One (1) used NRM 10" (250 mm) Hot Feed Rubber Extruder, Reliance 200HP DC motor, 500V, 1150/200RPM, ...
9050 Custom 1 Truck Tire Miscellaneous Tire Inspection Testing Band saw for cutting tires tyres, Reliance gearbox 11:1 ratio, Reeves 7.5 AMP, 1715 RPM, 480 VAC mot...
1700 Torrington 1 11D Bearings Anti-friction Mixer Parts One (1) Rebuilt Bearings Torrington set of number 11D mixer bearings, part number 23156 W33.
1032 Farrel 1 3D 70 Liter Litre Tangential 2-Wing Mixer One (1) Rebuilt Farrel 3D #3D Banbury Rubber Mixer, Semi-unidrive, drop_discharge_drilled_sides, 2-w...
1470 Farrel 1 F370 Body Chamber Mixer Parts One (1) Used Farrel F370 spare chamber only, 4-wing rotors, rack and pinion actuator, SSA dust seals...
1903 Soberay 1 11D Dust Seals SSA Mixer Parts Four (4) New dust seals for 11D mixer, 4 teflon rings, 24 springs, 4 floating ring keys.
1905 Soberay 4 F270 Dust Seals FYH Mixer Parts Four (4) New dust seals for F270 mixer,FYH style.
1878 Thermal Transfer Products 1 F80 3D TCU Temperature Control Unit Mixer Parts One (1) Used TCU for F80 or 3D mixer, 3-zone, 2HP-Door top, 5HP-Rotors, 7.5HP-Sides, Thermal Transfe...
2024 Adamson 1 16 x 36 400x915 2-Roll Mill One (1) Used Adamson 16 x 36, 400mm x 915mm, Rubber Mill, rubber mixing mill, silicone mill, Jones_G...
4129 Bolling 1 8 x 16 200x400 Inverted "L" Calender 4-Roll One (1) Used Bolling 8 x 16, 200mm x 400mm, 4-Roll Inverted “L” Rubber Calender, even_speed_connecti...
6117 Berstorff 1 8" 200mm 8.0" Cold Feed 12:1 Extruder Cold Feed One (1) Used Berstorff 8" (200mm) Cold_Feed_Rubber_Extruder, 12:1 L/D, Seimens 220HP, 50/2150RPM, 52...
6174 Royle 1 4 1/2" 120mm 4.5" Hot Feed Extruder Hot Feed One (1) Used Royle 4.5" 120mm 4 1/2" Hot Feed Rubber Extruder, 4:1 L/D, Motor 100HP AC, swing gate ...
9028 Marley 1 100 Ton Cooling Tower Miscellaneous One (1) Used Marley Cooling Tower, 100 Ton, Model 47100, L8'4" x W8' x H8'4", Weight 2160 (empty), F...
4240 Honeywell 1 84" Sheet Max. Gap Measurement System Calender Parts One (1) Used Honeywell Measurex MX ProLIne measurement and control system 8450, Model up to 84” (21...
4325 Joh. Peter Falter 1 48" 1200 Sheet Slitter Calender Parts One (1) Used Joh. Peter Falter (Germany) sheet slitter_with_adjustable_rotary_blades, 48”, 1200mm, m...
7590 Siemens 1 2000 HP DC Drive Panel Motor Drive Panel One (1) Used Siemens DC adjustable speed drive, 2000 HP, input 480V, 2365 amps, 3 phase, 60HZ, outpu...
1920 Farrel 1 11D Hopper Pneumatic Mixer Parts One (1) Used hopper cylinder and floating weight for an 11D mixer, floating weight dimensions 11.5" ...
1950 Torrington 1 F270 11D Bearings Anti-friction Mixer Parts One (1) Used_assortment_of_Torrington and SKF mixer bearings for 11D/F270 mixers, please contact us ...
1735 Farrel 1 3D Rotors Unidrive Mixer Parts One (1) Used set of Farrel 3D rotors, 2-wing, unidrive, SSA dust seal configuration.
1770 Farrel 1 F270 Rotors Unidrive Mixer Parts One (1) used set of Farrel F270 rotors, 4-wing type, unidrive configuration.
1765 Farrel 1 F270 Rotors Unidrive Mixer Parts One (1) Used_set_of_Farrel_F270 rotors, Banbury design, 4-wing type, Unidrive configuration.
3168 French 1 58 x 52 1470x1320 1400 Ton Slab Side Hydraulic Press One (1) Used French 58” x 52” slab side press, 42” ram diameter, 48” stroke, (8) 6.5” openings, 70” ...
3160 Adamson 1 48 x 48 1200x1200 4 - Post Parts Press Hydraulic Press Parts One (1) Used Adamson_48_x_48_4–Post hydraulic press, 30” ram, 45” stroke, Parts Only.
3165 Adamson 1 48 x 48 1200x1200 4 - Post Parts Press Hydraulic Press Parts One (1) Used Adamson 48" x 48" 4 - post hydraulic press, 30" ram, 60” stroke, no rods, parts only
1750 Farrel 1 11D Rotors Bull Gear Mixer Parts One (1) used set of Farrel 11D bull gear rotors
2011 Farrel 1 6 x 13 150x330 Lab Mill Mill One (1) Used Farrel Rubber Lab Mill, 6 x 13”, 150mm x 330mm, rubber mixing mill, cabinet style, unde...
6521 Welex 1 2" 50mm Plastic 24:1 Extruder Plastic One (1) Used 2” Plastic Welex Plastic Extruder, model 200-24/1-RHNV, 24:1 L/D, electrically heated, ...
6525 HPM 1 2 1/2" 60mm 2.5" Plastic 24:1 Extruder Plastic One(1) Used HPM 2.5” 60mm 2 1/2" Plastic Extruder, 24:1 L/D, electrically heated, air cooled, 30 HP ...
1748 Farrel 1 11D Rotors Unidrive Mixer Parts One (1) Used set of Farrel #11D rotors, unidrive, SSA dust seals, 32” long rotor face
1083 Farrel 1 F270 270 Liter Litre Tangential 4-Wing Mixer One (1) Rebuilt Farrel F270 Banbury Rubber Mixer, 4-wing tangential rotors; direct drive; 270 liter ...
5020 NRM 1 60 - 72 Material Width Body Ply Cutter Tire Body Ply Cutter NRM 60-72" Material Width Low_Table_Automatic_Body Ply Cutter with Automatic Splice for Tire Tyre pr...
1925 Bainite 1 F620 27D Hopper Pneumatic Mixer Parts One (1) New Bainite Hopper for F620 620 litre mixer, 24” x 37.5” floating weight opening (weight not...
4013 Bolling 1 12 x 28 300x700 Vertical Calender 2-Roll One (1) Used Bolling 12" x 28”, 300mm x 700mm, Bolling_2-Roll_Rubber_Calender, 30HP motor, Falk gear...
8259 Philadelphia 1 200 HP 35:1 Parallel Shaft Gearbox Reducer One (1) Used Philadelphia Gearbox Reducer, 200 HP service rating, 35:1 reduction ratio, 1.5 SF serv...
8260 Falk 1 200 HP 142:1 Parallel Shaft Gearbox Reducer One (1) Used Falk Gearbox Reducer, 200 HP service rating, 142:1 reduction ratio, 1.5 SF service fac...
8320 Amcot 1 400 HP 31.66:1 Parallel Shaft Gearbox Reducer One (1) Used Amcot Gearbox Reducer, 400 HP service rating, 31.66:1 gearbox ratio, 600 RPM Input, Cen...
8360 Santasalo 1 500 HP 25.36:1 Parallel Shaft Gearbox Reducer One (1) Used Santasalo Gearbox Reducer, 500HP (373kw) Service Rating, 25.36 Ratio, new 1996. Motor a...
8140 Dominion 1 150 HP 11.1:1 Parallel Shaft Gearbox Reducer One (1) Used_Dominion_Gearbox_Reducer 150 HP, 11:1 ratio, previously used on a 22x20x60, the output ...
7100 Reliance 1 50 HP DC Motor One (1) Used Reliance Motor, 50HP DC, 1750_RPM_500_Volts_60_cycle, 403AT frame
7140 General Electric 1 125 HP AC Motor One (1) Used General Electric Motor, 125HP AC, 1780 RPM, 460 Volt, 60 cycle
7200 Westinghouse 1 150 HP AC Motor One (1) Used Westinghouse Motor, 150HP AC, 1775 RPM, 440 Volts, Frame 507-5, 3 phase, 60 cycle, nema...
7220 General Electric 1 200 HP AC Motor One (1) Used GE General Electric Motor, 200HP AC, 705 RPM, 440 Volts
7300 Reliance 1 250 HP AC Motor OOne (1) Used Reliance Motor, 250 HP AC, 1780 RPM, 460 Volts, ID No. 917480A4, 60 HZ, 282 Amps
1923 Farrel 1 F270 Hopper Hydraulic Mixer Parts One (1) Used Farrel Hydraulic Hopper & Hydraulic Unit for F270 (new 2004), 4-piston design; hydrauli...
7273 General Electric 1 200 HP AC Motor One (1) Used General Electric Motor, 200HP AC, 700 RPM, 440 Volts, Frame 82668
7303 Brook 1 250 HP AC Motor One (1) Used Brook Motor, 250 HP AC, 705 RPM, 460 Volts, 60 HZ, Frame R26
7125 Westinghouse 1 100 HP AC Motor One (1) Used Westinghouse Motor, 100HP AC, 1770 RPM, 440 Volts, 130 Amps, 3 phase, 50 cycle
6330 Farrel 1 18 x 15 450x375 Drop Extruder Strainer Extruder Dump One (1) Rebuilt Farrel 18x15" Rubber Dump Extruder Strainer, Drop Extruder, 29.2 G/B ratio Rebuilt_4...
2028 Kobe 2 21 x 36 533x914 2-Roll Roller Bearing Mill One (1) Used Kobe 21” x 36” (533 x 914) Rubber Mill, rubber mixing mill, motor 125 HP DC, 230v, 130...
2162 Farrel 1 26 x 42 660x1060 Mill Cracker Mill Cracker One (1) Farrel 26” x 26” x 42”, 660mm x 1060mm, Cracker_Mill_Bare_Machine, Gearbox can be supplied p...
4031 Bolling 1 20 x 48 500x1200 Horizontal Calender 2-Roll One (1) Used Bolling 20” x 48”, 500mm x 1200mm, 2-Roll Rubber Calender, Westinghouse 125 HP DC, 240v...
4021 Kobe 1 21 x 36 533x915 Horizontal Calender 2-Roll One (1) Used Kobe 21” x 36”, 533mm x 915mm, Rubber Calender, gearbox 32:1 reduction ratio, friction...
8050 Farrel 1 6 x 13 150x330 Lab Mill Lab Equipment One (1) Used Farrel Rubber Lab Mill, 6 x 13” (150 x 330) rolls, cabinet style, under-slung drive, be...
8045 Flender 1 1.5" 38mm Rubber Extruder Lab Equipment One (1) New 1.5" Cold Feed Rubber Extruder, 12:1 L/D with Flender Gearbox Germany, screw and barrel ...
8060 Bolling 1 8 x 16 200x400 Lab Calender Lab Equipment One (1) Used Bolling 8 x 16 4-Roll Inverted “L” Rubber Calender, even_speed_connecting_gears, unders...
8063 Bolling 1 8 x 16 200x400 Lab Calender Lab Equipment One (1) Used Bolling 8 x 16 Inverted "L" Rubber Calender, individual 10 HP 550v - 1750 RPM direct d...
8075 PHI 1 9 x 12 225x300 Lab Press Lab Equipment One (1) Rebuilt PHI Lab Press with the below features. New platens size 9” x 12” with 3 heaters @30...
6071 NRM 1 4 1/2" 120mm 4.5" Cold Feed 12:1 Extruder Cold Feed One (1) Rebuilt NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 100 HP...
3130 Valves 5 3" 75 Valves for Hydraulic Compression Press Hydraulic Press Parts Five (5) Used Valves 3" pipe for Hydraulic Compression Press, previously used on a 48" x 48" press ...
4274 Spadone 2 44" 1100 Calender Wind-up Stand Calender Parts Two (2) Used Spadone 44” Calender Cantilever Wind-up Stand, 4-stations available, previously used fo...
6450 NRM 1 4.5" 120mm Screw Extruder Parts One (1) New NRM Plastiscrew 4.5” 120mm 12:1 L/D Screw, plastiscrew design for rubber extrusion.
6460 Berstroff 1 8" 200mm Screw Extruder Parts One (1) New Berstroff 8” 200mm 12:1 L/D Screw, high output design for polymer extrusion.
2599 Trabon 1 60" or 84" 1500 or 2100 Grease Pump Mill Parts One (1) Used Trabon Automatic Grease Pump for 60” or 84” rubber mill
1873 Farrel 1 F270 11D Coupling Half Mixer Parts One (1) Used Coupling Half for #11D or F270 Mixer, 68T tooth, 15.5” bore
4291 Spadone 1 48" 1200 Automatic Splicer Calender Parts One (1) Used Spadone 48” Automatic Splicer, previously used spadone cutter
1926 Farrel 1 F270 11D Hopper Rod/Ram Mixer Parts One (1) Used Farrel Hopper Rod / Ram for a 20”, 500mm, hopper, rod 3.5” x 80” commonly used on #11D ...
1927 Farrel 1 11D F270 Hopper Rod/Ram Mixer Parts One (1) Used Farrel Hopper Rod / Ram for a 20”, 500mm, hopper, rod 3.5” x 84” commonly used on #11D ...
2590 Farrel 2 17" bearing, 23" window height Journal Box Housings Mill Parts Two (2) Used Farrel Journal Box Housings, 17” bearing, 23” window height
2591 Farrel 2 17" bearing, 25" window height Journal Box Housings Mill Parts Two (2) Used Farrel Journal Box Housings, 17” bearing, 25” window height
3084 TMP 1 24 x 28 600x700 450 Ton Slab Side Hydraulic Press One (1) Used TMP 24” x 28” 600mm x 700mm Slab Side Rubber Hydraulic Press, 24 ram, 450 ton, 30” dayl...
3087 MKB 1 28 x 24 700x600 300 Ton Slab Side Hydraulic Press One (1) Used MKB 28” x 24” 700mm x 600mm Slab Side Rubber Hydraulic Press, 20” Ram, 300 Ton, 19” Day...
3112 Bolling 1 40 x 40 900x900 700 Ton Slab Side Hydraulic Press One (1) Used Bolling 40” x 40”, 30” ram_diameter_700_ton_38 daylight, 12” stroke no bolster or plate...
8099 Falk 1 40 HP 69:1 Right Angle Gearbox Reducer One (1) Used Falk Gearbox Reducer, 40HP, 69:1 ratio, right angle, previously used on a cushion calen...
3127 Eemco 6 58 x 52 x 3 1450x1300x75 Steam Platens for Hydraulic Compression Press Hydraulic Press Parts Six (6) Used Eemco 58" x 52" x 3" Steam Platens for Hydraulic Compression Press
2550 Renold 6 26" Dia Rolls Low Speed Chain Mill Parts One (1) Used Renold 200 Cottered Roller Chain, figure 8 / curved side bar, 2-1/2” pitch (pin-to-pin)...
6870 Royle 1 4 1/2" 120mm 4.5" Cold Feed 10:1 Extruder Silicone One (1) Used Royle 4.5” (120mm) Silicone_Cold_Feed_Extruder, 10:1 L/D, power roll feed, screw in die...
1035 Kobe 1 75 Liter Litre Tilt Kneader Mixer One (1) Used Kobe 75 Liter Litre Tilt Mixer, 125 HP DC motor, tilt discharge, direct drive gearbox, ...
1919 Farrel 1 11D Hopper Pneumatic Mixer Parts One (1) Used Farrel 11D Pneumatic hopper with floating weight for an 11D mixer, 22” cylinder, floati...
1938 Trabon 1 11D F270 Lubrication Panel Process and Lube Mixer Parts One (1) Used Trabon Process and Lube Lubrication Panel for #11D or F270 Mixer, Rexroth valves, Lubri...
1955 KSBI 1 11D Base Mixer Parts One (1) Used KSBI Base for #11D mixer, fabricated plate base, drop door type
3034 Vigeroy 1 12 x 12 300x300 60 Ton Slab Side Hydraulic Press One (1) Used Vigeroy 12" x 12" 300mm x 300mm Rubber_Hydraulic_Lab_Press, 8" ram, 60 ton, 10" dayligh...
3035 Vigeroy 1 12 x 12 300x300 60 Ton Slab Side Hydraulic Press One (1) Used Vigeroy 12" x 12" 300mm x 300mm Rubber Hydraulic Lab Press, 8" ram, 60 ton, 10" dayligh...
3037 Vigeroy 1 16 x 12 400x300 60 Ton Slab Side Hydraulic Press One (1) Used Vigeroy 16" x 12" 400mm x 300mm Rubber Hydraulic Lab Press, 8" ram, 60 ton, 12" dayligh...
6175 NRM 1 6" 150mm Hot Feed Extruder Hot Feed One (1) Used 6" NRM Hot Feed Rubber Extruder, Motor Reliance 100 HP DC, 500 volt, 1750/2000 rpm, Gea...
3129 Venango 2 42 x 150 x 3 Steam Platens Hydraulic Press Parts Two (2) Used Venango 42" x 150" x 3" Steam Platens for Hydraulic Compression Press
9060 Midland Ross 1 88" 2235m Cameron Slitter Miscellaneous One (1) Used Midland Ross 88” Cameron slitter, Midland_Cameron_Slitter, Model 608, S/N P8620, 88" wi...
2149 Farrel 1 28 x 100 700x2500 2-Roll Roller Bearing Mill One (1) Used Farrel 28x28x100” single mill, rubber_mixing_mill, ROLLER BEARING, anti-friction bearin...
8131 Lufkin 2 128 HP 59.5:1 Parallel Shaft Gearbox Reducer One (1) Used Lufkin D390 H Gearbox Reducer, 128 HP service rating, 59.5:1 reduction ratio, 1.5 SF se...
6575 Sterling 1 10" 250mm Plastic Extruder Plastic One (1) Used Sterling 10" (250mm) Plastic Extruder, 20/1 L/D, 500 HP DC, 1750/1900 RPM, 500 V, 41.8:...
2066 Farrel 1 22 x 60 560x1500 2-Roll Mill One (1) Used Farrel 22” x 22” x 60” 2-Roll mill, rubber mixing mill, Allis Chalmers 150 HP AC, 585 R...
6112 NRM 1 6" 150mm 6.0" Cold Feed 12:1 Extruder Cold Feed One (1) Used NRM 6" 150mm Cold Feed Rubber Extruder, 12:1 L/D, 250 HP 500V DC motor, power feed roll...
1084 Farrel 1 F270 270 Liter Litre Rebuilt Body Mixer One (1) Farrel Model F-270 4-wing intensive mixer body mechanically rebuilt. Rotor tip to Chamber s...
2007 Farrel 1 6 x 12 150x300 Lab Mill Mill One_(1)_Used_Farrel_Lab_Mill, 6 x 12” (150 x 30) rolls, rubber mixing mill, cabinet style, flip up g...
2009 Farrel 1 6 x 13 150x330 Lab Mill Mill One (1) Used Farrel Lab Mill, 6 x 13” (150 x 330) rolls, rubber mixing mill, cabinet style, flip up ...
6181 NRM 1 8" 200mm Hot Feed Extruder Hot Feed One (1) Used 8" NRM Hot Feed Extruder, right hand feed, pneumatically adjustable sheet head, GB rati...
3036 TMP 1 15 x 15 375x375 60 Ton 4-Post Hydraulic Press One (1) Used TMP 15" x 15" 375mm x 375mm Rubber Hydraulic Lab Press, 8" ram, 60 ton, 18" daylight, 1...
3191 Dieffenbacher 1 104 x 408 2650x10358 12000 Ton Window Frame Hydraulic Belt Press One (1) Used Dieffenbacher Conveyor Belt Press, 104" Wide x 34ft Long, window frame press, 12,000 to...
3185 Dieffenbacher 3 100 x 100 2500x2500 4000 Ton Window Frame Hydraulic Press One (1) Rebuilt Dieffenbacher 100" x 100" Window Frame Press Platens: 4.8” x 100” x 100” drilled fo...
3186 Dieffenbacher 3 104 x 116 2640x2946 4000ton Window Frame Hydraulic Press One (1) Rebuilt Dieffenbacher 104" x 116" Window Frame Press Platens: 4.8” x 104” x 116” drilled fo...
3187 Dieffenbacher 2 104 x 160 2640x4060 5500 Ton Window Frame Hydraulic Press One (1) Rebuilt Dieffenbacher 104" x 160" Window Frame Press Platens: 4.8” x 104” x 160” drilled fo...
6021 Emerson 2 2 1/2" 60mm 2.5" Cold Feed 12:1 Extruder Cold Feed Two (2) Used Emerson 2.5" 60mm Cold Feed Rubber Extruder, 12:1 L/D, 25:1 gearbox ratio, EMR gearbox,...
8461 Farrel 1 1500 HP 28:1 Unidrive F270 #11D Gearbox Reducer One (1) Used Farrel double_reduction_horizontal_parallel shaft mixer speed reducer arrangement L-RR ...
8462 Philadelphia 1 1500 HP 22:1 Unidrive F270 #11D Gearbox Reducer Item 8462 - One (1) Used Philadelphia reduction horizontal parallel shaft mixer speed reducer for #1...
8463 Philadelphia 1 1500 HP 33:1 Unidrive F270 #11D Gearbox Reducer Item 8462 - One (1) Used Philadelphia reduction horizontal parallel shaft mixer speed reducer for #1...
4003 Rewas 1 6 x 12 150x300 Vertical Calender 3-Roll One (1) Used Rewas 6x12 3-Roll Lab Calender, 7.5 HP Reeves Varidrive, Cabinet style, under-slung dri...
5293 4JET 1 25-49" Tire OD Passenger & Truck Tire Laser Engraver One (1) New 4JET Laser Tire Tyre Engraving Machine, Model T-MARK 1600 Tire Marking System, compact d...
1091 Farrel 1 F370 370 Liter Litre Spare Body Mixer One (1) Used Farrel F370 spare chamber only, parts machine, 4-wing rotors, rack and pinion actuator,...
2064 Adamson 1 20x22x60 1500mm 2-Roll Mill One (1) Used Adamson 20” x 22” x 60” 2-Roll mill, Falk 6.389:1 single reduction gearbox, bull gear d...
8361 Lufkin 1 540 HP 37.5:1 Parallel Shaft Gearbox Reducer One (1) Used Lufkin T720 BH Gearbox Reducer, 540 HP service rating, 37.5:1 reduction ratio, 1.5 SF s...
4019 Farrel 1 24 x 68 610x1725 Vertical Calender 3-Roll One (1) Rebuilt Farrel 24x68" 3-Roll Calender, General Electric 150 HP, 850/1700 RPM, 500 VDC motor,...
6601 Barwell 1 C3 Preformer Extruder Preformer One (1) Used Barwell C3 Preformer, Barwell_Rubber_Preformer, capacity 120 lbs, 10" x 55" chamber, Mo...
2025 Bolling 1 16 x 42 400x1060 2-Roll Mill One (1) Used Bolling 16” x 16” x 42” 2-Roll mill, 75 HP, 514 RPM, 440 VDC motor, direct drive, heavy...
3001 Custom 1 7x7 Filter Press Hydraulic Filter Press One (1) Used Filter Press, Hydraulic_Filter_Press, (30) 7” x 7” filter plates, ½ HP hydraulic unit a...
1037 TMP 1 75 Liter Litre Tilt Kneader Mixer One (1) Rebuilt TMP Technical Machine Products Techni-Mix 75 Liter Litre Rubber Tilt Mixer, 200 HP D...
6491 Mokon 1 9 KW Heater Extruder Parts One (1) Used Mokon TCU, 1 zone, one (1) motors 1.9 amps, 460V, heater 11.3 amps, total amps 13.2, to...
1001 Bolling 1 OO 1.6L Litre Lab Mixer Mixer One (1) Used Model Bolling Lab Banbury Mixer, 1.6 liter, 2.6 lb. capacity, 96 cu. in net volume of m...
6038 NRM 1 4 1/2" 120mm 4.5" Cold Feed 12:1 Extruder Cold Feed One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, Reliance 100 HP ...
6439 Davis Standard 1 3.5" 90mm Head Cross Extruder Parts One (1) Used Cross Head for 3.5” cold feed extruder, Davis Standard, 2” hose
6468 Farrel 1 18" x 15" Screw Extruder Parts One (1) Used 18" x 15" Screw for Farrel Dump Extruder
6449 NRM 1 3.5" 90mm Screw Extruder Parts One (1) Used NRM Plastiscrew 3.5” 90mm 17:1 L/D Screw, plastiscrew design for rubber extrusion.
6469 Farrel 1 18" x 15" Screw Extruder Parts One (1) Used 18" x 15" Screw for Farrel Dump Extruder
1584 Torrington 1 11D F270 Bearings Anti-friction Mixer Parts Torrington Mixer Bearings One (1) used set of number 11D F270 mixer bearings, part number 23156 W33....
1760 Farrel 2 #11D Rotors Unidrive Mixer Parts One (1) used set of Farrel #11D rotors, 2-wing, unidrive configuration
4029 Allen 1 16 x 48 400x1220 Vertical Calender 2-Roll One (1) Used Allen 16” x 48”, 400mm x 1220mm, 2-Roll Calender, drive can be built to suit.
7390 General Electric 1 1500 HP AC Motor One (1) Used GE Motor 1500 HP @ 1200RPM input, 2300VAC, Frame 84095.
8319 Alten 1 400 HP 30:1 Unidrive #4 Bolling Gearbox Reducer One (1) Used Alten Gearbox 30:1 ratio, 400 HP @ 1200 RPM, 1.75:1 service factor, parallel shaft, dua...
1891 Farrel 1 11A Door Top Mixer Parts One (1) Used Farrel 11A Mixer Doortop with cylinder assembly.
5017 Micro Poise 1 13-16" bead Passenger, light truck Tire Inspection Testing Micro-poise Balancer One (1) Used Micro Poise Balancer, passenger light truck tire tyre application,...
6520 Custom 1 1" 25mm Cold feed 12:1 ratio Extruder Plastic One (1) Rebuilt 1" 25mm Cold Feed Plastic Extruder, 12:1 L/D, 15:1 G/B ratio, 5 HP AC motor, 1750rpm...
6405 NRM 1 10" Barrel Extruder Parts One (1) New NRM Barrel for NRM 10" hot feed extruder, non-roller feed type
6423 NRM 1 8" 203mm Head Sheet Sheeting Extruder Parts One (1) Used NRM Sheeting Head for 8" NRM or Davis Standard rubber extruder, produces up to 20" wide...
6427 Veraco 1 10" Head Die Extruder Parts One (1) Used Veraco Die for 10" NRM or Davis Standard rubber extruder, produces up to 30" wide rubbe...
6489 Spaltemp 3 3-Zone Thermolator Extruder Parts Three (3) Used Spaltemp Thermolator for an extruder, mill, mixer or calender, 3-zone
1681 Farrel 1 11A 11D Bull Gear & Pinion Mixer Parts One (1) Used Mixer bull gear and pinion for 11D mixer. 20” face 108 tooth bull gear, 22 tooth pinion...
6113 Troester / Monsanto 1 6" 150mm 6.0" Cold Feed 18:1 Extruder Cold Feed One (1) Used Troester / Monsanto 6" 150mm Cold Feed Rubber Extruder, 18:1 L/D, 250 HP, 1750 RPM, 500...
3183 Dieffenbacher 1 104 x 52 2640x2030 2750 Ton Window Frame Hydraulic Press One (1) Rebuilt Dieffenbacher 104" x 52" Window Frame Press Platens: 4.8” x 104” x 52” drilled for ...
1455 Farrel 1 #11D Body Chamber Mixer Parts One (1) Used Farrel #11D unidrive chamber only, 237 liter capacity, 2-wing rotors, SSA dust stops, d...
7399 General Electric 1 2500 HP AC Motor One (1) Used GE Motor 2500 HP @ 885 RPM input, 2300V, Frame 8511SU
1085 Kobelco 1 BB270 270 Liter Litre Tangential 4-Wing Mixer One (1) Used Complete Kobelco KSBI BB270 Rubber Mixer (500 LB batch 1.2 SG), Gearbox: Philadelphia 2...
1086 Kobelco 1 BB270 270 Liter Litre Tangential 4-Wing Mixer One (1) Used Complete Kobelco KSBI BB270 Rubber Mixer (500 LB batch 1.2 SG), Gearbox: Philadelphia 2...
3025 PHI 1 9 x 12 225x300 18 Ton Hand Pump Style Hydraulic Press Rebuilt PHI hand pump style 18-ton hydraulic lab press. New platens size 9” x 12” with 3 heaters @3...
2146 Farrel 1 28 x 84 700x2130 2-Roll Mill One (1) Used Farrel 28 x 84 (710 x 2130) Rubber Roller Mill, Falk Gearbox with 51.49 reduction ratio...
6832 NRM 1 3.5" 90mm 3 1/2" Silicone Extruder 10:1 Extruder Silicone One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Silicone Extruder, 10:1 L/D, 50 HP AC 1750 RPM, 480V motor, 24....
8268 Lufkin 1 340 HP 20.84:1 Parallel Shaft Gearbox Reducer One (1) Used Lufkin Model DHB16 Gearbox Reducer, 340 HP service rating, 20.84:1 reduction ratio, 1.3...
2068 Adamson 1 22 x 60 560x1500 2-Roll Mill Item 2068 - Adamson 22 x 60 (560 x 1525) 2-Roll Mill One (1) Used Adamson 22” x 22” x 60” 2-Roll mi...
1065 Bolling 1 #10 195 Liter Litre Tangential 2-Wing Mixer One (1) Used Bolling #10 Rubber Mixer, 195 liter chamber, 350 lb batch, 2-wing tangential rotors, 60...
9063 Greenerd 1 12.0" Blade, 18” daylight under blade Bale Cutter Miscellaneous Bale Cutter Greenerd Press 12.0" Blade Length Hydraulic Guillotine Bale Cutter, 12" blade length, 18...
3169 Southwark 1 72 x 72 1800x1800 8-Post Hydraulic Press One (1) Used Southwark 72” x 72” 8-post hydraulic press, four (4) 21” rams, 1600 tons closing force ...
9065 Joh. Peter Falter 2 48” max material width Shear Cutter Miscellaneous Item 9065 - One (1) Used Joh. Peter Falter (Germany) shear cutter, 48” max material width, pull roll...
9058 Joh. Peter Falter 2 48” wide Pneumatic Slitter Miscellaneous Item 9058 - One (1) Used Joh. Peter Falter (Germany) 48” wide pneumatic slitter, adjustable width
4311 Joh. Peter Falter 2 48” wide 2-roll Cooling Drum Stand Calender Parts Item 4311 - One (1) Used Joh. Peter Falter (Germany) 48” wide 2-roll cooling drum stand, chain drive...
2563 Farrel 1 27T, 1DP Connecting Gear Mill Parts One (1) Used Farrel Connecting Gear 27T, 1DP, 14.5” face
2564 Farrel 1 27T, 1DP Connecting Gear Mill Parts Item 2563 - One (1) Used Farrel Connecting Gear 27T, 1DP, 15” face
2565 Farrel 1 22/18T, 1.25DP Connecting Gears Mill Parts One (1) Used Set Farrel Connecting Gears 22/18T, 1.25 DP, 8” face, 8-1/2” bore, previously used on 1...
2566 Farrel 1 19/19T, 1DP Connecting Gears Mill Parts One (1) Used Set Farrel Connecting Gears 19/19T, 12” face,11-1/2” & 13.5” bore, previously used on 2...
2573 1 5-1/2” & 8-12” bores Coupling Low Speed Mill Parts One (1) Used Low Speed Coupling Set with chain, 5-1/2” & 8-12” bores, 20 teeth, excellent condition...
2578 1 26" Dia Rolls Low Speed Wobbler Coupling Set Mill Parts One (1) Used Farrel Low Speed Wobbler Coupling Set, previously used on a 26x84” mill.
6401 NRM 1 3.5” 90mm Barrel Extruder Parts One (1) Used Spare Barrel for NRM 3.5” 90mm 17:1 L/D cold feed rubber extruder.
1858 TMP 1 75L Connecting Gears Mixer Parts One (1) Used Set of Connecting Gears for a TMP 75L tilt mixer
1884 Farrel 1 F270 Floating Weight Mixer Parts One (1) Used Floating Weight for Farrel F270 Mixer.
8115 Alten 1 75 HP, 86.5:1 Parallel Shaft Gearbox Reducer One (1) Used Alten Model TG-320A-2-87 Gearbox Reducer, 75 HP service rating, 86.5:1 reduction ratio,...
6500 Tempco 4 230V, 6” bore, 14” length Heater Extruder Parts One (1) NEW Tempco Electrical Cast-In Heater, band heater for Davis Standard extruder barrel, item ...
3810 Parker Hannifin 1 5 HP 230/460V Power Unit Division Hydraulic Press Parts One (1) Used Parker Hannifin Hydraulic Unit, Power Unit Division, 5 HP 230/460V motor, Sperry Vicker...
1885 Farrel 1 F270 Floating Weight Mixer Parts One (1) Rebuilt Floating Weight for Farrel F270 Mixer
1888 Farrel 1 11D Mixer Door Support Mixer Parts One (1) used Farrel Door Support for #11D Mixer, includes door shaft
1892 Farrel 1 11D Mixer Doortop Mixer Parts One (1) Used Farrel 11D Mixer Doortop
1918 Farrel 1 F200 Mixer Pneumatic Hopper Mixer Parts One (1) Pneumatic Hopper for a Farrel F200 mixer, includes floating weight.
1937 1 F270 Mixer Trabon Process and Lube Lubrication Panel Mixer Parts One (1) Used Trabon Process and Lube Lubrication Panel for #11D or F270 Mixer
8110 Falk 1 60 HP 36.44:1 Parallel Shaft Gearbox Reducer One (1) Used Falk Model 2100Y83-3 Gearbox Reducer, 60 HP service rating, 36.44:1 reduction ratio, 1....
8111 Foote Bros Model 1 60 HP 14.2:1 Gearbox Gearbox Reducer One (1) Used Foote Bros Model 100-DX Gearbox Reducer, 60 HP service rating, 14.2:1 reduction ratio, ...
8136 D.O James Gear 1 139 HP 36.44:1 Gearbox Gearbox Reducer One (1) Used D.O James Gear Model 270HS Gearbox Reducer, 139 HP service rating, 9.07:1 reduction rat...
8139 Lufkin 1 150 HP 35:1 Gearbox Reducer Gearbox Reducer One (1) Used Lufkin Gearbox Reducer, 150 HP service rating, 35:1 reduction ratio, 1.5 SF service fac...
8255 Pierce Pingon 1 200 HP 28.29:1 Gearbox Reducer Gearbox Reducer One (1) Used Pierce Pingon Gearbox Reducer, 200 HP service rating, 28.29:1 reduction ratio, 228 lbs ...
8266 Falk 1 300 HP 9.354:1 Gearbox Reducer Gearbox Reducer One (1) Used Falk Model 155Y2-A Gearbox Reducer, 300 HP service rating, 9.354:1 reduction ratio, 1.4...
8359 Flender 1 500 HP 13.88:1 Gearbox Reducer Gearbox Reducer One (1) Used Flender Model SZN500 Gearbox Reducer, 500 HP service rating, 13.881:1 reduction ratio, ...
7148 Alloy Craft 1 140" Dia Steam Autoclave Item 7148- One (1) Used Alloy Craft 140” ID Steam Autoclave Vulcanizer, approximately 112” internal ...
7149 Alloy Craft 1 152" Dia Steam Autoclave Item 7149 - One (1) Used Alloy Craft 152” ID Steam Autoclave Vulcanizer, approximately 120 internal ...
4134 Farrel 1 12 x 24 300x600 Inverted "L" Calender 4-Roll One (1) Used Farrel 12 x 24 4-Roll Inverted “L” Calender, GE 100 HP 1750/2200 RPM 500 VDC motor, dir...
2641 Farrel 1 28” x 60” 700x1500 Calender Roll Rolls One (1) Used Farrel 28” x 60” Calender Roll, middle roll, drilled for cooling, 19” bushing journals,...
2650 Farrel 1 24" x 66" 600x1650 Calender Roll Rolls One (1) Used Farrel 24x66” Calender Roll, middle roll, drilled for cooling, 32” shaft and 45” long ...
2655 Farrel 1 28" x 75" 700x1875 Calender Roll Rolls One (1) Used Farrel 28” x 75” Calender Roll, middle roll, cored for cooling, 19” bushing journals, s...
2663 Farrel 1 26" x 84" 650x2100 Mill Roll Rolls One (1) Used Farrel 26” x 84” Mill Roll, front roll, cored for cooling, 17” bushing journals, 15” co...
2664 Farrel 1 26" x 84" 650x2100 Mill Roll Rolls One (1) Used Farrel 26” x 84” Mill Roll, front roll, cored for cooling, 17” bushing journals, 15” co...
2665 Farrel 1 26" x 84" 650x2100 Mill Roll Rolls One (1) Used Farrel 26” x 84” Mill Roll, rear roll, cored for cooling, 17” bushing journals, corrug...
2675 Farrel 4 28” x 86” 700x2150 Calender Roll Rolls One (1) Used Farrel 28” x 86” Calender Roll, middle roll, drilled for cooling, roller bearing journa...
2680 Farrel 1 27" x 100" 675x2500 Mill Roll Rolls One (1) Used Farrel 27” x 100” Mill Roll, front_roll_drilled_for_cooling, 17” bushing journals, smoo...
2681 Farrel 1 27" x 100" 675x2500 Calender Roll Rolls One (1) Used Farrel 27” x 100” Calender Roll, front roll, drilled for cooling, 17” bushing journals,...
6399 NRM 1 3.5” 90mm Barrel Extruder Parts One (1) Used Spare Barrel for NRM 3.5” 90mm 17:1 L/D cold feed rubber extruder
6400 NRM 1 3.5” 90mm Barrel Extruder Parts One (1) Used Spare Barrel for NRM 3.5” 90mm 17:1 L/D cold feed rubber extruder.
6402 NRM 1 4.5” 120mm Barrel Extruder Parts One (1) Used Spare Barrel for NRM 4.5” 120mm 12:1 L/D cold feed rubber extruder.
6403 NRM 1 4.5” 120mm Barrel Extruder Parts One (1) Used Spare Barrel for NRM 4.5” 120mm 12:1 L/D cold feed rubber extruder
6447 NRM 1 3.5” 90mm Plastiscrew Extruder Parts One (1) Used NRM Plastiscrew 3.5” 90mm 17:1 L/D Screw, plasticscrew design for rubber extrusion
7126 General Electric 1 100 HP DC Electric Statohm Motor Motor One (1) Used General Electric Statohm Motor, 100 HP DC, 1150/2000 RPM, 550 Volts, 146 Amps, class F ...
6448 NRM 1 3.5” 90mm Plastiscrew Extruder Parts One (1) Used NRM Plastiscrew 3.5” 90mm 17:1 L/D Screw, plasticscrew design for rubber extrusion
6451 NRM 1 4.5” 120mm Plastiscrew Extruder Parts One (1) Used NRM Plastiscrew 4.5” 120mm 12:1 L/D Screw, plasticscrew design for rubber extrusion
6452 NRM 1 4.5” 120mm Plastiscrew Extruder Parts One (1) New NRM Plastiscrew 4.5” 120mm 12:1 L/D Screw, plasticscrew design for rubber extrusion
3126 French 1 60" x 60" x 2" 1500x1500x50 Steam Platen Hydraulic Press Parts One (1) Used French 60" x 60" x 2" Steam Platen for Hydraulic Compression Press
6029 Ensine 1 3 1/2 90mm 3.5" Cold Feed 17:1 Extruder Cold Feed One (1) Used Ensine 3.5" 90mm Cold Feed Extruder, 17:1 L/D, 20.89:1 G/B ratio, 60 HP 1150RPM 500 VDC...
1039 TMP 1 75 Liter Litre Tilt Kneader Mixer One (1) Used TMP 75 Litre Silicone Tilt Mixer, Reliance 150 HP 1150 RPM 500 VDC motor, tilt discharg...
2013 Farrel 1 6 x 13 150x330 Lab Mill Mill One (1) Rebuilt Farrel Lab Mill, 6 x 13” (150 x 330) rolls, cabinet style, under-slung drive, belt d...
2016 Farrel 1 6 x 13 150x330 Rebuilt Lab Mill Mill Item 2016 - One (1) Rebuilt Farrel Lab Mill, 6 x 13” (150 x 330) rolls, cabinet style, under-slung d...
8039 Instron 1 Model 1011 Tensile Tester Lab Equipment One (1) Used Instron Model 1011 Tensile Tester, force 1000 lb, S/N 0683, System ID 1011C0683, last c...
1092 Shaw 1 K7 310 Liter Litre Intermeshing Intermix Mixer One (1) Used Francis Shaw K7 Intermix mixer, intermeshing rotors, unidrive, drop door, 310 liter cha...
6329 Farrel 1 18 x 15 450x375 Drop Extruder Rollerdie Extruder Dump One (1) Used Farrel 18x15" Rubber Dump Extruder with 20x42” Roller Die Head, drop extruder, 300 HP e...
9091 Plastic Granulator 1 100 HP Open Rotor Granulator Item 9091 - One (1) Used Granulator, cyclone discharge, 17.5" x 30" feed opening, hog mill, 100 HP, ...
9092 Mitts Merril 1 150 HP Hog Mill Hog Mill One (1) Used Mitts & Merril Hog Grinder, 5/8” screen, hog mill, 150 HP, 895 RPM, 460 VAC motor, belt...
9094 Plastic Granulator 1 200 HP Open Rotor Granulator One (1) Used Granulator, cyclone discharge, open rotor, 200 HP, 3540 RPM, 220/440 VAC motor, belt dr...
8254 Lufkin 1 200 HP Gearbox Reducer Gearbox Reducer One (1) Used Lufkin D912 Gearbox Reducer, Model MD912, 200 HP service rating, 28.72:1 reduction rati...
8321 Lufkin 1 400 HP 40.8:1 Parallel Shaft Gearbox Reducer Item 8321 - One (1) Used Lufkin T720 B Gearbox Reducer, 400 HP service rating, 40.8:1 reduction rati...
1009 Moriyama 1 0.5 Liter Litre Tilt Kneader Mixer One (1) Used Moriyama Lab Mixer, lab tilt mixer, model D0.5-3, 1 lb. batch, 0.5 liter net volume cha...
1012 Farrel 1 OOC 4.3 Litre Lab Mixer Mixer One (1) Used Farrel Lab Banbury Mixer, Model OOC, 4 lb. batch capacity, 4.3 liter / 263 cu. in net v...
4026 Farrel 1 20 x 42 500x1066 Vertical Calender 2-Roll One (1) Used Farrel 20” x 20” x 42” 2-Roll vertical calender, 100 HP, 460 VAC, 900 RPM, bullgear dri...
1749 Farrel 2 #9 Rotors Bull Gear Mixer Parts One (1) Used set of Farrel #9 rotors, 2-wing, bull gear configuration
1764 Farrel 2 F270 Rotors Unidrive Mixer Parts One (1) Used Set of Farrel F270 rotors, Banbury design, ST 4-wing type, Unidrive configuration
1771 Farrel 2 F270 Rotors Unidrive Mixer Parts One (1) Used Set of Farrel F270 rotors, Banbury design, 2-wing type, Unidrive configuration